Standard copper soldered tube fittings connect to copper tubing or other fittings by heating or soldering for a permanent, leaktight connection. These fittings are suitable for plumbing applications with potable water.

CPVC is ideally suited for hot and cold water pressure distribution systems in residential and commercial applications.

he bolts can be adjusted to the proper torque from the topside of the coupling, eliminating the need for extra excavation and under-dig for the wrench. 260 psi working pressure.

Class 150 threaded zinc galvanized steel fittings connect with medium-pressure (300-999 psi) pipe. Threaded pipe fittings use PTFE tape to secure seal.

Class 150 threaded fittings connect with medium-pressure (300-999 psi) pipe. Fittings twist onto pipe using various male and female thread connections including NPT (National Pipe Thread) or BSPT (British Standard Pipe Taper).

Cast Iron is the premier piping material for sanitary and storm drain, waste, and vent applications. No-Hub pipe and fittings are non-pressure applications where temperatures will not exceed 212 deg F. No-Hub pipe and fittings are joined using a shielded hubless coupling. They have high crush strength and are noncombustible. They are known for their superior sound deadening qualities as well as their ease of installation.

Push-to-connect brass pipe connectors are ideal for working in tight spaces but can be leveraged wherever repairs are needed. The faster install time and versatile use reduces installation errors, allowing pros to schedule more jobs in a day.

Insert transition fittings minimize any stress problems found with metal-to-plastic piping system transitions. The CPVC and brass or stainless steel ends compensate for the expansion and contraction variations between materials.

Nontoxic Schedule 80 CPVC pressure-rated fittings connect to pipe and have thicker walls than Schedule 40 fittings. The socket ends fit over the end of pipe and require glue or adhesive to secure the connection.

PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and easy to install. They require no special tools for cutting, and be installed with solvent cementing, threading, flanging, and roll-grooved joining.

JWM Copper Press joint fittings are manufactured to exceeed the industry standards for performance, quality, and appearance.

Insert transition fittings minimize any stress problems found with metal-to-plastic piping system transitions. The CPVC and brass or stainless steel ends compensate for the expansion and contraction variations between materials.

These elbows are made from durable, corrosion resistant and lead-free brass. The fitting conforms to NSF 61 and 372 and is registered in Mass.

PVC, also known as polyvinyl chloride, is a synthetic plastic polymer with a rigid structure. PVC resists corrosion and most chemicals. CPVC is similar to PVC, but has been chlorinated. It is similar to PVC in chemical resistance, but is more ductile.

The socket ends fit over the end of a PVC pipe and require glue or adhesive to secure the connection. Schedule 40 fittings have thinner walls than Schedule 80

PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems where temperatures will not exceed 140° F. PVC is lightweight and easy to install.

WATTS® 0009431 LF25AUB-Z3 Pressure Reducing Valve, 1-1/2 in Nominal, FNPT Union x FNPT End Style, 25 to 75 psi Pressure, Cast Copper Silicon Alloy Body, Domestic

Viega MegaPress®G is the first carbon steel press system for gas and can be utilized with Schedule 5 to Schedule 40 black iron pipe. Viega MegaPress®G fittings for black iron pipe reduce installation time and eliminate messy cutting oils.

316 stainless steel heavy duty construction Shield color coated black Heavy-duty stainless coupling for corrosive applications Provide superior positive seal to accommodate possible disparities in the no-hub pipe & fittings

Flexible PVC Tubular Drain Connector makes it easy to extend, alter or repair any combination of brass or plastic drain pipe. It provides a lasting seal on a variety of drainage systems. Connection type is mechanical.

JWM Copper Press joint fittings are manufactured to exceeed the industry standards for performance, quality, and appearance.

Coupling, Application Potable Water, Fitting Side A Connection Type Push-Fit, Fitting Side B Connection Type Push-Fit, Fitting Side A Pipe Size 3/4 in, Fitting Side B Pipe Size 3/4 in

This unit comes with two 4500-Watt elements and an automatic thermostat which keeps the water at the desired temperature. A 240-Volt electrical connection is required for installation. A premium grade anode rod provides long lasting tank protection.

No Lead Cast Bronze Water Service CTS Pack Joint x FNPT Adapte

1-1/4" to 2" 80 p.s.i. 80°F, 1/2" to 1" 100 p.s.i. 100°F, Conforms to AWWA C 800

Flexible PVC Tubular Drain Connector makes it easy to extend, alter or repair any combination of brass or plastic drain pipe. It provides a lasting seal on a variety of drainage systems. Connection type is mechanical.

Flexible PVC Tubular Drain Connector makes it easy to extend, alter or repair any combination of brass or plastic drain pipe. It provides a lasting seal on a variety of drainage systems. Connection type is mechanical.

Clean Bagged: No Coating: Asphaltic Ductile Iron Class: C110